SUNGROW - SH15T V11 Inverter

The Sungrow SH15T hybrid inverter is a 15 kVA three-phase inverter designed for photovoltaic installations with lithium-ion battery storage. It is intended for professional projects in the high-end residential, commercial, and small industrial sectors requiring integrated management of solar production, storage, and grid connection.

Its 3 independent MPPT trackers (with 2/2/1 string distribution per MPPT) and a recommended PV input power of 30,000 Wp They allow for coverage of multi-orientation configurations or multi-pitched roofs. The MPPT voltage range extends from 150 V to 950 V, for broad compatibility with commercially available modules.

The storage management is based on a charge and discharge current of 50 A, for a maximum discharge power of 15,000 W.

Backup mode is a core feature of this product: the integrated 63 A bypass and switching time of less than 10 ms ensure near-instantaneous power continuity. Managing unbalanced loads in both network and backup modes is natively supported, without the need for additional hardware.

Installation is simplified by a Plug & Play design, natural convection operation (35 dB, silent), and multi-protocol communication: RS485, WLAN, Ethernet, and CAN. The inverter is IP65 and C5 certified, suitable for indoor and outdoor installations.

KEY POINTS FOR PROFESSIONALS

• 3 independent MPPTs, 2/2/1 string distribution, max. PV input current 80 A (32/32/16 A).

• Recommended PV input power: 30,000 Wp , max DC voltage 1000 V.

• Rated AC output power: 15,000 W / 15,000 VA, max. AC output current 22.8 A.

• Battery charge/discharge current: 50 A / 50 A , max discharge power 15,000 W.

• Integrated 63 A bypass and backup switching time of less than 10 ms.

• Unbalanced output 100% supported in network and off-network modes.

• Maximum yield 98.1% / European yield 97.6%.

• IP65 / C5 protection, integrated Type II DC and AC surge arrester, AFCI protection.

• Natural convection cooling, typical noise level 35 dB(A).

• RS485 communication, WLAN, Ethernet, CAN, DI x4 / DO x2 / DRM0 inputs/outputs.

• DC connection via MC4 compatible connectors (max. 6 mm²), battery via Plug & Play connector (max. 10 mm²), AC via Plug & Play connector (max. 16 mm²).

• Dimensions: 620 x 480 x 245 mm, weight 38 kg, wall mounting.

• Compliance: IEC/EN 62109, IEC 61727, IEC 62116, VDE-AR-N 4105, EN 50549-1, AS/NZS 4777.2:2020, IEC 0-21.

• 10-year manufacturer's warranty.

RECOMMENDED APPLICATIONS

• Three-phase residential installations with storage and self-consumption management.

• Small-power tertiary projects incorporating a backup function with continuity of power supply.

• Sites requiring unbalanced load management without additional equipment.

• Environments subject to frequent network outages, thanks to a switchover time of less than 10 ms.

• Indoor or outdoor installations in environments with atmospheric constraints (C5, IP65).

ADDED VALUE POWR CONNECT
The technical sales team assists installers in sizing the PV/storage system combination, verifying battery compatibility, and optimizing energy management parameters according to the site's consumption profile. Furthermore, POwRLine is a Sungrow Level 1 certified service provider : it handles commissioning, configuration, and after-sales support for the equipment, offering installers a single technical contact from order placement to operation.