HUAWEI - SUN2000-100KTL-M2 UPS

The SUN2000-100KTL-M2 delivers 100 kW of nominal active power (110 kVA) and targets medium-power C&I installations: industrial rooftops, parking lot canopies, and power plants. Ground up to a few MWp in a multi-inverter configuration. It shares the same chassis as the 115KTL-M2 (1035 x 700 x 365 mm, less than or equal to 93 kg) but is positioned on a lower output current level (144.4 A at 400 Vac), which can simplify the sizing of downstream AC protections.

The architecture is based on 10 MPPTs with 2 inputs each (20 string inputs). Each tracker accepts 30 A (20 A per input in single-string mode), with a maximum voltage of 1100 V and an MPPT range of 200 to 1000 V. Maximum efficiency reaches 98.8% at 480 V (EU efficiency 98.6% at 480 V, 98.4% at 400 V). Nominal output voltage: 380 / 400 / 480 Vac. Maximum active power 110 kW at cos phi = 1.

The inverter incorporates AFCI and Smart String Level Disconnector (electronic string disconnection without a fuse). Smart IV Curve diagnostics analyzes string characteristic curves remotely. The MBUS bus communicates with MERC optimizers (isolation transformer required).

Protections: DC Type II surge protection (Type I optional), AC Type II surge protection, anti-islanding, RCMU, isolation, reverse polarity, string monitoring. Smart Air Cooling, IP66, -25°C to +60°C, 4000 m range. Amphenol Helios H4 DC connectors, waterproof AC connector + OT/DT. RS485, USB, WLAN adapter + FusionSolar, optional 4G Smart Dongle or WLAN-FE. Nighttime power consumption less than 3.5 W. Transformerless.

KEY POINTS FOR PROFESSIONALS

• 100 kW / 110 kVA, 10 MPPT / 20 inputs , EU efficiency 98.4% at 400 V / 98.6% at 480 V.

• Integrated AFCI and Smart String Level Disconnector (not present on the 115KTL-M2).

• Remote Smart IV Curve diagnostics, fault monitoring by string.

• Output voltage 380 / 400 / 480 Vac (the 115K does not support 380 V).

• DC Type II / I surge arrester (optional), AC Type II, RCMU, MBUS bus.

• IP66, Smart Air Cooling, less than or equal to 93 kg, same chassis as the 115KTL-M2.

• Complies with EN 62109, EN 50549-1/2, VDE-AR-N4105, C10/11.

ADDED VALUE POWR CONNECT

POwR Connect ensures delivery of the SUN2000-100KTL-M2 throughout France. Our sales engineers guide C&I developers in choosing between the 100K (with AFCI, 380 V output) and the 115K (higher power, 400/480 V output only) according to the project constraints and network connection.